Glass Bottle Manufacturing Process

Simply put, glass bottles are manufactured in this way: Perfume glass bottle manufacturers mix a variety of raw materials and throw them in high-temperature industrial furnaces, melt them into perfume glass bottles, and then use scissors to cut small pieces. Open, promote one by one to the abrasive tools in the equipment, blow them into a fixed state with air, and then quench and refrigerate them.

The detailed dissolution is like this:

(1) Seasoning

---There are more than ten kinds of raw materials for manufacturing glass bottles. Among them, powdery materials are almost not solved. Only the added cement clinker (ie glass slag) must be cleaned and removed from the metal material residue. The solved raw materials are based on a certain proportion Mixing and symmetrical, using feeder to promote to industrial kilns;

(2) Melting and response

---The raw materials of glass bottles are gradually melted into almost very thin liquid in the industrial kiln at a high temperature of 1500 degrees. During the whole melting process, a small amount of residue gradually moves down to the bottom of the industrial kiln, accompanied by the addition of raw materials afterwards , The glass water of the car that responded well gradually flows to the material gate;

(3) Cut to understand and shape

---After the laminated glass of the glass bottle feeder gate flows into the material bowl, the temperature is slightly reduced, and the relative density and viscosity are increased. The feeder shears cut off the laminated glass column with the fixed net weight, according to different material channels. Throw it into the abrasive tool below, and then go through different equipment suppression or blow molding;

(4) Fire suppression and quality inspection

---After the formed products are gradually removed from the ground stress according to the furnace, the temperature gradually drops to the indoor temperature, and the quality inspection staff remove the defective products after arriving in the packaging room;

(5) Packaging and storage of finished products

---After packing according to a different method, use an electric forklift or manpower to move to the warehouse for loading and delivery